Difference between revisions of "PCR Amplification of DNA"

From Bridges Lab Protocols
Jump to: navigation, search
(updated)
Line 1: Line 1:
 +
==SOP==
 +
*[[SOP - Electrophoresis]]
 +
 
==Materials==
 
==Materials==
*Primers – order from IDT prediluted to 100 mM in TE.  Make working solution of 1 uM (100x) in water with both sense and antisense primers combined (300uL water, 3uL of each primer)
+
*Primers – order from IDT prediluted to 100 mM in TE.  Make working solution of 0.4uM-1 uM (100x) in water with both sense and antisense primers combined (300uL water, 3uL of each primer)
*dNTPs – dilute to 2 mM each in water, make single use aliquots (50 uL aliquots... 10uL of each dNTP, 460uL water)
+
*DreamTaq Green PCR Master mix - contains dNTPs, polymerase, salts, and buffer with loading dye  https://www.thermofisher.com/order/catalog/product/K1081?ICID=search-product#/K1081?ICID=search-product
*Template – generally 1uL or less of a plasmid miniprep
+
*RNAse-Free water - comes in DreamTaq kit
*Polymerase – use Pfu Turbo for cloning and Taq for noncloning.  Use appropriate buffer.
+
  
 
==Protocol==
 
==Protocol==

Revision as of 16:49, 8 June 2020

SOP

Materials

Protocol

  • Use the following volumes per reaction
  • Buffer, 5 uL of 10X buffer (Dave's fridge)
  • Primers, 10uL of 1uM stock solution in water (both primers combined)
  • dNTPs, 5uL of 2 mM ("molecular biology stuff" box in freezer)
  • Sterile water, 28 uL
  • Template 1 uL
  • Polymerase 1 uL (turbo pfu found in "enzymes" box in freezer)
  • Run PCR Program (approx 3.5 to 4 hours). Normally use touchdown PCR (DAVETD) as follows:
  1. 1 min at 94
  2. 30s at 65
  3. 2 min/kb at 72
  4. 30s at 94
  5. 30s at 63 then -0.5/cycle
  6. 2 min/kb at 72
  7. Repeat steps 4-6 28 times
  8. 30s at 94
  9. 30s at 45
  10. 11 min at 72
  11. Hold at 4 until ready
  • Purify PCR product if necessary using Qiagen kit (Add 5x PB)