H&E Staining

From Bridges Lab Protocols
Revision as of 15:23, 8 June 2020 by Reddj (talk | contribs) (added SOPs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

SOP

Rehydrate tissue sections

  1. After cutting sections of tissue onto glass slides, de-pariffinize the tissue sections in xylene for 3 min. Repeat for a total of 3x 3 minute washes using fresh xylene each time
  2. Rehydrate the tissue sections by immersing in 100% ethanol for 3 minutes. Repeat a second time using fresh 100% ethanol
  3. Immerse sections in 95% ethanol for 3 minutes. Repeat a second time using fresh 95% ethanol
  4. Immerse sections in 70% ethanol for 3 minutes
  5. Rinse sections 2 to 3 times in distilled water

Stain tissue sections with haematoxylin

  1. Immerse sections in pre-prepared Mayer's haematoxylin for 5 minutes
  2. Rinse under running tap water (slides still in box) until water is clear. This will take about 5 minutes

Stain tissue sections with eosin, dehydrate and coverslip

  1. Immerse sections in 1% eosin from 15 seconds to 1 minute
  2. Rinse 3-4 times under running tap water
  3. Immerse in 70% ethanol for 2 minutes
  4. Immerse in in 95% ethanol for 2 minutes. Repeat a second time using fresh 95% ethanol
  5. Immerse in in 100% ethanol for 2 minutes. Repeat twice more using fresh 100% ethanol
  6. Immerse in xylene for 2 minutes. Repeat twice more using fresh xylene. Check staining under the microscope
  7. Coverslip using Permount or other xylene-based mounting medium