Open main menu

Measuring Cross-Sectional Area (CSA)

Revision as of 18:30, 27 August 2018 by Lgunder (Talk | contribs) (Created page with "== Using ImageJ == #Drag your image into ImageJ. #Use the Magnifying glass. Click on the image to zoom in and right click to zoom out #Zoom in on the scale on your image #Use...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Revision as of 18:30, 27 August 2018 by Lgunder (Talk | contribs) (Created page with "== Using ImageJ == #Drag your image into ImageJ. #Use the Magnifying glass. Click on the image to zoom in and right click to zoom out #Zoom in on the scale on your image #Use...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Using ImageJ

  1. Drag your image into ImageJ.
  2. Use the Magnifying glass. Click on the image to zoom in and right click to zoom out
  3. Zoom in on the scale on your image
  4. Use the Scrolling tool(hand) to grab and move the picture
  5. Set the scale with the *Straight* (line tool). Click on one end of the scale and hold shift to keep the line straight to the other end

To Analyze and Get Results

  1. Analyze
  2. Set scale
  3. Known distance: 200
  4. Unit of length: um
  5. OK
  6. Adjust the zoom. Start in upper left hand corner
  7. Use the Freehand selections tool (bean) to trace the fiber by holding down mouse press M
  8. Continue tracing and press M after each fiber trace
  9. Results
  10. Summarize
Last modified on 27 August 2018, at 18:43