Difference between revisions of "Connect to Network Drives"
From Bridges Lab Protocols
Davebridges (Talk | contribs) (wrote initial page) |
Davebridges (Talk | contribs) m |
||
| Line 1: | Line 1: | ||
==For Windows== | ==For Windows== | ||
| − | + | #Right click on my computer and then click on Map Network Drive | |
| − | + | #Change the drive letter to what you want (Suggested S: for groups, H: for home and T: for temp, but you can make these whatever you want) | |
| − | + | #Under folder type '''\\adenosine.lsi.umich.edu\groups''' | |
| − | + | #Click on '''Connect using a different user name''' | |
| − | + | #Enter '''LSI\uniqname''' where uniqname is your name | |
| − | + | #Enter your password, and ensure that '''Reconnect at logon''' is checked | |
| − | + | #Repeat steps 3-6 for other drives, replacing groups with home and temp respectively. | |
Revision as of 15:47, 22 December 2009
For Windows
- Right click on my computer and then click on Map Network Drive
- Change the drive letter to what you want (Suggested S: for groups, H: for home and T: for temp, but you can make these whatever you want)
- Under folder type \\adenosine.lsi.umich.edu\groups
- Click on Connect using a different user name
- Enter LSI\uniqname where uniqname is your name
- Enter your password, and ensure that Reconnect at logon is checked
- Repeat steps 3-6 for other drives, replacing groups with home and temp respectively.
