Difference between revisions of "Glycogen Determination from Tissues"
From Bridges Lab Protocols
Davebridges (Talk | contribs) (updated details about assay) |
Davebridges (Talk | contribs) |
||
| Line 12: | Line 12: | ||
* Amyloglucosidase 0.3 mg/mL | * Amyloglucosidase 0.3 mg/mL | ||
* Glucose quantification kit (Wako Autokit Glucose Buffer Solution cat # 439-9091; for protocol see http://www.wakodiagnostics.com/pi/pi_autokit_glucose.pdf) | * Glucose quantification kit (Wako Autokit Glucose Buffer Solution cat # 439-9091; for protocol see http://www.wakodiagnostics.com/pi/pi_autokit_glucose.pdf) | ||
| − | * Glucose standard solution (500 mg/dL; Wako) | + | * Glucose standard solution (200 or 500 mg/dL; Wako) |
==Protocol== | ==Protocol== | ||
| Line 26: | Line 26: | ||
# Quantify glucose using kit: | # Quantify glucose using kit: | ||
## Add 700 uL Glucose Buffer Solution with Color Reagent to a plastic cuvette. | ## Add 700 uL Glucose Buffer Solution with Color Reagent to a plastic cuvette. | ||
| − | ## Add 1-5 uL glucose standard ( | + | ## Add 1-5 uL glucose standard (500mg/dL) for standard curve |
## Add 10 uL digested glycogen | ## Add 10 uL digested glycogen | ||
## Mix and incubate at 37C for 5 min | ## Mix and incubate at 37C for 5 min | ||
Revision as of 15:03, 24 June 2011
Materials and Buffers
- Screw Capped Vials
- 30% KOH, prepared fresh
- 1M Sodium Sulfate
- Ethanol
- 50 mM Sodium Acetate, pH 4.8
- Amyloglucosidase 0.3 mg/mL
- Glucose quantification kit (Wako Autokit Glucose Buffer Solution cat # 439-9091; for protocol see http://www.wakodiagnostics.com/pi/pi_autokit_glucose.pdf)
- Glucose standard solution (200 or 500 mg/dL; Wako)
Protocol
- Weight out 30-90 mg tissue into *screw cap vial* and record weights. Screw cap vials are really important or else the lids will pop off
- Add 300 uL 30% KOH and place on 95C heat block for 30 min with occasional mixing.
- Cool and then add 100 uL Sodium Sulfate and 800 uL Ethanol.
- Boil for 5 min.
- Centrifuge at 13 000 RPM for 5 min.
- Resuspend pellet in 200 uL water then add 400 uL ethanol. Boil 5 min, spin 5 min and Repeat wash steps twice more.
- Dry pellet on the bench
- Prepare amyloglucosidase solution by diluting the AG stock 100X into 50 mM Sodium Acetate, pH 4.8. Prepare enough for 200 uL per tube plus some extras
- Resuspend pellets in 200uL amyloglucosidase solution and incubate at 37C for 3h-O/N
- Quantify glucose using kit:
- Add 700 uL Glucose Buffer Solution with Color Reagent to a plastic cuvette.
- Add 1-5 uL glucose standard (500mg/dL) for standard curve
- Add 10 uL digested glycogen
- Mix and incubate at 37C for 5 min
- Measure absorbance at 505 nm
- Calculate glycogen levels as umoles glucose released per g tissue (should be ~10)
Reference:
